Material Safety Data Sheets
SECTION I- MANUFACTURER EMERGENCY INFORMATION | |
Manufacturer: B&M Enterprises Corp. 2117 Kenneth Drive Albert Lea, MN 56007 |
Emergency and Information Telephone: 507-373-2743 |
SECTION II-HAZAROUS INGREDIENTS/IDENTITY INFORMATION | |
Hazardous Components: OSHA PEL ACGIH TLV %(optional) Butoxyethanol 15ppm 12-15 Sodium Hydroxide 1ppm .2 Aqueous Ammonia N/A 1-2 |
|
SECTION III-PHYSICAL CHEMICAL CHARACTERISTICS | |
Boiling Point 195° F Vapor Pressure (MM Hg): N/A Vapor Density (Air=1): N/A Solubility in Water: Complete Appearance and Odor: Clear, red liquid: ammonia odor |
Specific Gravity (H2O=1): 0.985 Melting Point: N/A Evaporation Rate (Butyl Acetate=1): <1 |
SECTION IV-REACTIVITY DATA | |
Stability: Stable Incompatibility (Materials to Avoid): Strong Oxidizing Agents Hazardous Decomposition Products: Carbon Dioxide, Carbon Monoxide Hazardous Polymerization: Will Not Occur Conditions to Avoid: None |
|
SECTION V-FIRE AND EXPLOSION HAZARD DATA | |
Flash Point -- Method Used: Non-flammable Extinguishing Media: Water, Carbon Dioxide, Dry Chemical, Foam Special Firefighting Procedures: None usually required Unusual Fire and Explosion Hazards: No unusual fire and explosion hazard |
|
SECTION IV-HEALTH HAZARD | |
Routes of Entry: Inhalation-Yes Skin-Yes Ingestion-Yes Eye Contact: Flush with large amounts of water for at least 15 minutes. Contact physician immediately. Skin Contact: Flush with large amounts of water. Seek medical attention if irritation persists. Ingestion: DO NOT INDUCE VOMITING. Drink several glasses of water or milk. Contact physician. |
|
SECTION VI-PRECAUTIONS FOR SAFE HANDLING AND USE | |
Steps to be Taken if Material is Released or Spilled: Contain spill. Mop, scoop, or vacuum up as much as possible for reuse or disposal. Flush remainder to sewer with plenty of water. Waste Disposal Method: Keep in accordance with local, state, and federal regulations. Other Precautions: KEEP OUT OF REACH OF CHILDREN |
|
SECTION VII-CONTROL MEASURES | |
Respiratory Protection (Specify Type): Not usually required Ventilation: Local Exhaust- Usually Adequate Special: N/A Protective Gloves: Rubber or Plastic Eye Protection: Safety Glasses recommended Other Protective Clothing or Equipment: Routine protective clothing and equipment adequate. Work/Hygiene Practices: Normal safe housekeeping practices adequate. |
|
SECTION I- MANUFACTURER EMERGENCY INFORMATION | |
Manufacturer: B&M Enterprises Corp. 2117 Kenneth Drive Albert Lea, MN 56007 |
Emergency and Information Telephone: 507-373-2743 |
SECTION II-HAZAROUS INGREDIENTS/IDENTITY INFORMATION | |
Hazardous Components: OSHA PEL ACGIH TLV %(optional) Carbitol (diethylene glycol-monoethyl ether) 100ppm 5% |
|
SECTION III-PHYSICAL CHEMICAL CHARACTERISTICS | |
Boiling Point 212° F Vapor Pressure (MM Hg): Unknown Vapor Density (Air=1): >1 Solubility in Water: Dispersible Appearance and Odor: light blue, opaque liquid; sweet odor |
Specific Gravity (H2O=1): 1.02 Melting Point: Unknown Evaporation Rate (Butyl Acetate=1): <1 |
SECTION IV-REACTIVITY DATA | |
Stability: Stable Conditions to Avoid: high temperature Incompatibility (Materials to Avoid): None Hazardous Decomposition Products: None Hazardous Polymerization: Will Not Occur Conditions to Avoid: None |
|
SECTION V-FIRE AND EXPLOSION HAZARD DATA | |
Flash Point -- Method Used: Non-flammable Extinguishing Media: As appropriate for surrounding area Special Firefighting Procedures: Cool containers with water Unusual Fire and Explosion Hazards: Emulsion will not burn, but dry polymer film may |
|
SECTION IV-HEALTH HAZARD | |
Routes of Entry: Inhalation-Yes Skin-Yes Ingestion-Yes Eye Contact: Flush with large amounts of water for at least 15 minutes. Contact physician immediately. Skin Contact: Flush with large amounts of water. Ingestion: DO NOT INDUCE VOMITING. Drink several glasses of water or milk. Contact physician. |
|
SECTION VI-PRECAUTIONS FOR SAFE HANDLING AND USE | |
Steps to be Taken if Material is Released or Spilled: Contain spill. Mop, scoop, or vacuum up as much as possible for reuse or disposal. Flush remainder to sewer with plenty of water. Waste Disposal Method: Keep in accordance with local, state, and federal regulations. Other Precautions: KEEP OUT OF REACH OF CHILDREN |
|
SECTION VI-PRECAUTIONS FOR SAFE HANDLING AND USE | |
Respiratory Protection (Specify Type): Not usually required Ventilation: Local Exhaust- Usually Adequate Special: N/A Protective Gloves: Rubber or Plastic Eye Protection: Safety Glasses recommended Other Protective Clothing or Equipment: Routine protective clothing and equipment adequate. Work/Hygiene Practices: Normal safe housekeeping practices adequate. |
Mechanical: Satisfactory Other: N/A |
.